From e12220be79e25c1c5cb866e1e98091d35079cd3e Mon Sep 17 00:00:00 2001
From: Sires <ranearodrigo1@gmail.com>
Date: Mon, 26 Aug 2019 19:52:41 +0200
Subject: [PATCH] Add translation for technic mod
---
technic/helpers.lua | 144 ++++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 128 insertions(+), 16 deletions(-)
diff --git a/technic/helpers.lua b/technic/helpers.lua
index f0c2fc6..5963b68 100644
--- a/technic/helpers.lua
+++ b/technic/helpers.lua
@@ -1,23 +1,56 @@
-local digit_sep_esc
-do
- local sep = technic.config:get("digit_separator")
- sep = tonumber(sep) and string.char(sep) or sep or " "
- -- Escape for gsub
- for magic in ("().%+-*?[^$"):gmatch(".") do
- if sep == magic then
- sep = "%"..sep
- end
+local constant_digit_count = technic.config:get("constant_digit_count")
+
+-- converts a number to a readable string with SI prefix, e.g. 10000 → "10 k",
+-- 15 → "15 ", 0.1501 → "150.1 m"
+-- a non-breaking space (U+a0) instead of a usual one is put after number
+-- The precision is 4 digits
+local prefixes = {[-8] = "y", [-7] = "z", [-6] = "a", [-5] = "f", [-4] = "p",
+ [-3] = "n", [-2] = "µ", [-1] = "m", [0] = "", [1] = "k", [2] = "M",
+ [3] = "G", [4] = "T", [5] = "P", [6] = "E", [7] = "Z", [8] = "Y"}
+function technic.pretty_num(num)
+ -- the small number added is due to floating point inaccuracy
+ local b = math.floor(math.log10(math.abs(num)) +0.000001)
+ local pref_i
+ if b ~= 0 then
+ -- b is decremented by 1 to avoid a single digit with many decimals,
+ -- e.g. instead of 1.021 MEU, 1021 kEU is shown
+ pref_i = math.floor((b - 1) / 3)
+ else
+ -- as special case, avoid showing e.g. 1100 mEU instead of 1.1 EU
+ pref_i = 0
end
- digit_sep_esc = sep
+ if not prefixes[pref_i] then
+ -- This happens for 0, nan, inf, very big values, etc.
+ if num == 0 then
+ -- handle 0 explicilty to avoid showing "-0"
+ if not constant_digit_count then
+ return "0 "
+ end
+ -- gives 0.000
+ return string.format("%.3f ", 0)
+ end
+ return string.format("%.4g ", num)
+ end
+
+ num = num * 10 ^ (-3 * pref_i)
+ if constant_digit_count then
+ local comma_digits_cnt = 3 - (b - 3 * pref_i)
+ return string.format("%." .. comma_digits_cnt .. "f %s",
+ num, prefixes[pref_i])
+ end
+ return string.format("%.4g %s", num, prefixes[pref_i])
end
+-- some unittests
+assert(technic.pretty_num(-0) == "0 ")
+assert(technic.pretty_num(0) == "0 ")
+assert(technic.pretty_num(1234) == "1234 ")
+assert(technic.pretty_num(123456789) == "123.5 M")
-function technic.pretty_num(num)
- local str, k = tostring(num), nil
- repeat
- str, k = str:gsub("^(-?%d+)(%d%d%d)", "%1"..digit_sep_esc.."%2")
- until k == 0
- return str
+
+-- used to display power values
+function technic.EU_string(num)
+ return technic.pretty_num(num) .. "EU"
end
@@ -110,3 +143,82 @@
end, vector.round(pos)
end
+
+--- Like trace_node_ray, but includes extra positions close to the ray.
+function technic.trace_node_ray_fat(pos, dir, range)
+ local x_step = dir.x > 0 and 1 or -1
+ local y_step = dir.y > 0 and 1 or -1
+ local z_step = dir.z > 0 and 1 or -1
+
+ local next_poses = {}
+
+ local i = 1
+ return function(p)
+ local ni, np = next(next_poses)
+ if np then
+ next_poses[ni] = nil
+ return np
+ end
+
+ -- Approximation of where we should be if we weren't rounding
+ -- to nodes. This moves forward a bit faster then we do.
+ -- A correction is done below.
+ local real_x = pos.x + (dir.x * i)
+ local real_y = pos.y + (dir.y * i)
+ local real_z = pos.z + (dir.z * i)
+
+ -- How far off we've gotten from where we should be.
+ local dx = math.abs(real_x - p.x)
+ local dy = math.abs(real_y - p.y)
+ local dz = math.abs(real_z - p.z)
+
+ -- If the real position moves ahead too fast, stop it so we
+ -- can catch up. If it gets too far ahead it will smooth
+ -- out our movement too much and we won't turn fast enough.
+ if dx + dy + dz < 2 then
+ i = i + 1
+ end
+
+ -- Step in whichever direction we're most off course in.
+ local sx, sy, sz -- Whether we've already stepped along each axis
+ if dx > dy then
+ if dx > dz then
+ sx = true
+ p.x = p.x + x_step
+ else
+ sz = true
+ p.z = p.z + z_step
+ end
+ elseif dy > dz then
+ sy = true
+ p.y = p.y + y_step
+ else
+ sz = true
+ p.z = p.z + z_step
+ end
+
+ if vector.distance(pos, p) > range then
+ return nil
+ end
+
+ -- Add other positions that we're significantly off on.
+ -- We can just use fixed integer keys here because the
+ -- table will be completely cleared before we reach this
+ -- code block again.
+ local dlen = math.sqrt(dx*dx + dy*dy + dz*dz)
+ -- Normalized axis deltas
+ local dxn, dyn, dzn = dx / dlen, dy / dlen, dz / dlen
+ if not sx and dxn > 0.5 then
+ next_poses[1] = vector.new(p.x + x_step, p.y, p.z)
+ end
+ if not sy and dyn > 0.5 then
+ next_poses[2] = vector.new(p.x, p.y + y_step, p.z)
+ end
+ if not sz and dzn > 0.5 then
+ next_poses[3] = vector.new(p.x, p.y, p.z + z_step)
+ end
+
+ return p
+ end, vector.round(pos)
+end
+
--
Gitblit v1.8.0