From 6cc471e986c694298716c257528c653395bd757d Mon Sep 17 00:00:00 2001
From: Zefram <zefram@fysh.org>
Date: Fri, 15 Aug 2014 13:25:46 +0200
Subject: [PATCH] Simplify music player interface
---
technic/machines/supply_converter.lua | 286 +++++++++++++-------------------------------------------
1 files changed, 68 insertions(+), 218 deletions(-)
diff --git a/technic/machines/supply_converter.lua b/technic/machines/supply_converter.lua
index bee99d2..d89c3c1 100644
--- a/technic/machines/supply_converter.lua
+++ b/technic/machines/supply_converter.lua
@@ -1,232 +1,82 @@
-- The supply converter is a generic device which can convert from
-- LV to MV and back, and HV to MV and back.
--- The machine will not convert from HV directly to LV.
-- The machine is configured by the wiring below and above it.
--- It is prepared for an upgrade slot if this is to be implemented later.
---
--- The conversion factor is a constant and the conversion is a lossy operation.
--
-- It works like this:
--- The top side is setup as the "RE" side, the bottom as the "PR" side.
--- Once the RE side is powered it will deliver power to the other side.
+-- The top side is setup as the receiver side, the bottom as the producer side.
+-- Once the receiver side is powered it will deliver power to the other side.
-- Unused power is wasted just like any other producer!
---
-minetest.register_node(
- "technic:supply_converter", {
- description = "Supply Converter",
- tiles = {"technic_supply_converter_top.png", "technic_supply_converter_bottom.png", "technic_supply_converter_side.png",
- "technic_supply_converter_side.png", "technic_supply_converter_side.png", "technic_supply_converter_side.png"},
- groups = {snappy=2,choppy=2,oddly_breakable_by_hand=2},
- sounds = default.node_sound_wood_defaults(),
- drawtype = "nodebox",
- paramtype = "light",
- is_ground_content = true,
- node_box = {
- type = "fixed",
- fixed = {-0.5, -0.5, -0.5, 0.5, 0.5, 0.5},
- },
- selection_box = {
- type = "fixed",
- fixed = {-0.5, -0.5, -0.5, 0.5, 0.5, 0.5},
- },
- on_construct = function(pos)
- local meta = minetest.env:get_meta(pos)
- meta:set_float("technic_hv_power_machine", 1)
- meta:set_float("technic_mv_power_machine", 1)
- meta:set_float("technic_power_machine", 1)
- meta:set_string("infotext", "Supply Converter")
- meta:set_float("active", false)
- end,
- })
+
+local S = technic.getter
+
+local run = function(pos, node)
+ local demand = 10000
+ local remain = 0.9
+ -- Machine information
+ local machine_name = S("Supply Converter")
+ local meta = minetest.get_meta(pos)
+
+ local pos_up = {x=pos.x, y=pos.y+1, z=pos.z}
+ local pos_down = {x=pos.x, y=pos.y-1, z=pos.z}
+ local name_up = minetest.get_node(pos_up).name
+ local name_down = minetest.get_node(pos_down).name
+
+ local from = technic.get_cable_tier(name_up)
+ local to = technic.get_cable_tier(name_down)
+
+ if from and to then
+ local input = meta:get_int(from.."_EU_input")
+ meta:set_int(from.."_EU_demand", demand)
+ meta:set_int(from.."_EU_supply", 0)
+ meta:set_int(to.."_EU_demand", 0)
+ meta:set_int(to.."_EU_supply", input * remain)
+ meta:set_string("infotext", machine_name
+ .." ("..input.." "..from.." -> "
+ ..input * remain.." "..to..")")
+ else
+ meta:set_string("infotext", S("%s Has Bad Cabling"):format(machine_name))
+ if to then
+ meta:set_int(to.."_EU_supply", 0)
+ end
+ if from then
+ meta:set_int(from.."_EU_demand", 0)
+ end
+ return
+ end
+
+end
+
+minetest.register_node("technic:supply_converter", {
+ description = S("Supply Converter"),
+ tiles = {"technic_supply_converter_top.png", "technic_supply_converter_bottom.png",
+ "technic_supply_converter_side.png", "technic_supply_converter_side.png",
+ "technic_supply_converter_side.png", "technic_supply_converter_side.png"},
+ groups = {snappy=2, choppy=2, oddly_breakable_by_hand=2, technic_machine=1},
+ sounds = default.node_sound_wood_defaults(),
+ drawtype = "nodebox",
+ paramtype = "light",
+ node_box = {
+ type = "fixed",
+ fixed = {-0.5, -0.5, -0.5, 0.5, 0.5, 0.5},
+ },
+ on_construct = function(pos)
+ local meta = minetest.env:get_meta(pos)
+ meta:set_string("infotext", S("Supply Converter"))
+ meta:set_float("active", false)
+ end,
+ technic_run = run,
+})
minetest.register_craft({
output = 'technic:supply_converter 1',
recipe = {
- {'technic:stainless_steel_ingot', 'technic:stainless_steel_ingot','technic:stainless_steel_ingot'},
- {'technic:mv_transformer', 'technic:mv_cable', 'technic:lv_transformer'},
- {'technic:mv_cable', 'technic:rubber', 'technic:lv_cable'},
+ {'technic:fine_gold_wire', 'technic:rubber', 'technic:doped_silicon_wafer'},
+ {'technic:mv_transformer', 'technic:machine_casing', 'technic:lv_transformer'},
+ {'technic:mv_cable0', 'technic:rubber', 'technic:lv_cable0'},
}
})
-minetest.register_abm(
- { nodenames = {"technic:supply_converter"},
- interval = 1,
- chance = 1,
- action = function(pos, node, active_object_count, active_object_count_wider)
- -- Conversion factors (a picture of V*A - loss) Asymmetric.
- local lv_mv_factor = 5 -- division (higher is less efficient)
- local mv_lv_factor = 4 -- multiplication (higher is more efficient)
- local mv_hv_factor = 5 -- division
- local hv_mv_factor = 4 -- multiplication
- local max_lv_demand = 2000 -- The increment size power supply tier. Determines how many are needed
- local max_mv_demand = 2000 -- -""-
- local max_hv_demand = 2000 -- -""-
+for tier, machines in pairs(technic.machines) do
+ technic.register_machine(tier, "technic:supply_converter", technic.producer_receiver)
+end
- -- Machine information
- local machine_name = "Supply Converter"
- local meta = minetest.env:get_meta(pos)
- local upgrade = "" -- Replace with expansion slot later??
-
- -- High voltage on top, low at bottom regardless of converter direction
- local pos_up = {x=pos.x, y=pos.y+1, z=pos.z}
- local pos_down = {x=pos.x, y=pos.y-1, z=pos.z}
- local meta_up = minetest.env:get_meta(pos_up)
- local meta_down = minetest.env:get_meta(pos_down)
- local convert_MV_LV = 0
- local convert_LV_MV = 0
- local convert_MV_HV = 0
- local convert_HV_MV = 0
- -- check cabling
- if meta_up:get_float("mv_cablelike") == 1 and meta_down:get_float("cablelike") == 1 then
- convert_MV_LV = 1
- upgrade = "MV-LV step down"
- end
- if meta_up:get_float("cablelike") == 1 and meta_down:get_float("mv_cablelike") == 1 then
- convert_LV_MV = 1
- upgrade = "LV-MV step up"
- end
- if meta_up:get_float("mv_cablelike") == 1 and meta_down:get_float("hv_cablelike") == 1 then
- convert_MV_HV = 1
- upgrade = "MV-HV step up"
- end
- if meta_up:get_float("hv_cablelike") == 1 and meta_down:get_float("mv_cablelike") == 1 then
- convert_HV_MV = 1
- upgrade = "HV-MV step down"
- end
- --print("Cabling:"..convert_MV_LV.."|"..convert_LV_MV.."|"..convert_HV_MV.."|"..convert_MV_HV)
-
- if convert_MV_LV == 0 and convert_LV_MV == 0 and convert_HV_MV == 0 and convert_MV_HV == 0 then
- meta:set_string("infotext", machine_name.." has bad cabling")
- meta:set_int("LV_EU_demand", 0)
- meta:set_int("LV_EU_supply", 0)
- meta:set_int("LV_EU_input", 0)
- meta:set_int("MV_EU_demand", 0)
- meta:set_int("MV_EU_supply", 0)
- meta:set_int("MV_EU_input", 0)
- meta:set_int("HV_EU_demand", 0)
- meta:set_int("HV_EU_supply", 0)
- meta:set_int("HV_EU_input", 0)
- return
- end
-
- -- The node is programmed with an upgrade slot
- -- containing a MV-LV step down, LV-MV step up, HV-MV step down or MV-HV step up unit
-
- if upgrade == "" then
- meta:set_string("infotext", machine_name.." has an empty converter slot");
- technic.unregister_LV_machine("technic:supply_converter")
- technic.unregister_MV_machine("technic:supply_converter")
- technic.unregister_HV_machine("technic:supply_converter")
- meta:set_int("LV_EU_demand", 0)
- meta:set_int("LV_EU_supply", 0)
- meta:set_int("LV_EU_input", 0)
- meta:set_int("MV_EU_demand", 0)
- meta:set_int("MV_EU_supply", 0)
- meta:set_int("MV_EU_input", 0)
- meta:set_int("HV_EU_demand", 0)
- meta:set_int("HV_EU_supply", 0)
- meta:set_int("HV_EU_input", 0)
- return
- end
-
- -- State machine
- if upgrade == "MV-LV step down" and convert_MV_LV then
- -- Register machine type
- technic.register_LV_machine("technic:supply_converter","PR")
- technic.register_MV_machine("technic:supply_converter","RE")
-
- -- Power off automatically if no longer connected to a switching station
- technic.switching_station_timeout_count(pos, "MV")
-
- local eu_input = meta:get_int("MV_EU_input")
- if eu_input == 0 then
- -- Unpowered - go idle
- --hacky_swap_node(pos, machine_node)
- meta:set_string("infotext", machine_name.." Unpowered")
- meta:set_int("LV_EU_supply", 0)
- meta:set_int("MV_EU_supply", 0)
-
- meta:set_int("LV_EU_demand", 0)
- meta:set_int("MV_EU_demand", max_mv_demand)
- else
- -- MV side has got power to spare
- meta:set_string("infotext", machine_name.." is active (MV:"..max_mv_demand.."->LV:"..eu_input*mv_lv_factor..")");
- meta:set_int("LV_EU_supply", eu_input*mv_lv_factor)
- end
- ---------------------------------------------------
- elseif upgrade == "LV-MV step up" and convert_LV_MV then
- -- Register machine type
- technic.register_LV_machine("technic:supply_converter","RE")
- technic.register_MV_machine("technic:supply_converter","PR")
-
- -- Power off automatically if no longer connected to a switching station
- technic.switching_station_timeout_count(pos, "LV")
-
- local eu_input = meta:get_int("LV_EU_input")
- if eu_input == 0 then
- -- Unpowered - go idle
- --hacky_swap_node(pos, machine_node)
- meta:set_string("infotext", machine_name.." Unpowered")
- meta:set_int("LV_EU_supply", 0)
- meta:set_int("MV_EU_supply", 0)
-
- meta:set_int("LV_EU_demand", max_lv_demand)
- meta:set_int("MV_EU_demand", 0)
- else
- -- LV side has got power to spare
- meta:set_string("infotext", machine_name.." is active (LV:"..max_lv_demand.."->MV:"..eu_input/lv_mv_factor..")");
- meta:set_int("MV_EU_supply", eu_input/lv_mv_factor)
- end
- ---------------------------------------------------
-
- elseif upgrade == "HV-MV step down" and convert_HV_MV then
- -- Register machine type
- technic.register_MV_machine("technic:supply_converter","PR")
- technic.register_HV_machine("technic:supply_converter","RE")
-
- -- Power off automatically if no longer connected to a switching station
- technic.switching_station_timeout_count(pos, "HV")
-
- local eu_input = meta:get_int("HV_EU_input")
- if eu_input == 0 then
- -- Unpowered - go idle
- --hacky_swap_node(pos, machine_node)
- meta:set_string("infotext", machine_name.." Unpowered")
- meta:set_int("MV_EU_supply", 0)
- meta:set_int("HV_EU_supply", 0)
-
- meta:set_int("MV_EU_demand", 0)
- meta:set_int("HV_EU_demand", max_hv_demand)
- else
- -- HV side has got power to spare
- meta:set_string("infotext", machine_name.." is active (HV:"..max_hv_demand.."->MV:"..eu_input*hv_mv_factor..")");
- meta:set_int("MV_EU_supply", eu_input*hv_mv_factor)
- end
- ---------------------------------------------------
- elseif upgrade == "MV-HV step up" and convert_MV_HV then
- -- Register machine type
- technic.register_MV_machine("technic:supply_converter","RE")
- technic.register_HV_machine("technic:supply_converter","PR")
-
- -- Power off automatically if no longer connected to a switching station
- technic.switching_station_timeout_count(pos, "MV")
-
- local eu_input = meta:get_int("MV_EU_input")
- if eu_input == 0 then
- -- Unpowered - go idle
- --hacky_swap_node(pos, machine_node)
- meta:set_string("infotext", machine_name.." Unpowered")
- meta:set_int("MV_EU_supply", 0)
- meta:set_int("HV_EU_supply", 0)
-
- meta:set_int("MV_EU_demand", max_mv_demand)
- meta:set_int("HV_EU_demand", 0)
- else
- -- MV side has got power to spare
- meta:set_string("infotext", machine_name.." is active (MV:"..max_mv_demand.."->HV:"..eu_input/mv_hv_factor..")");
- meta:set_int("HV_EU_supply", eu_input/mv_hv_factor)
- end
- ---------------------------------------------------
- end
- end,
-})
--
Gitblit v1.8.0