From 12d0c6522bbca906910aae0321cbaa7eb48db8c2 Mon Sep 17 00:00:00 2001
From: Zefram <zefram@fysh.org>
Date: Wed, 30 Jul 2014 21:28:30 +0200
Subject: [PATCH] Correct breakability of sandstone CNC nodes
---
technic/machines/HV/nuclear_reactor.lua | 77 +++++++++++++++++++++-----------------
1 files changed, 43 insertions(+), 34 deletions(-)
diff --git a/technic/machines/HV/nuclear_reactor.lua b/technic/machines/HV/nuclear_reactor.lua
index 90a107a..e5d7a1b 100644
--- a/technic/machines/HV/nuclear_reactor.lua
+++ b/technic/machines/HV/nuclear_reactor.lua
@@ -97,64 +97,74 @@
end
end
+-- The standard reactor structure consists of a 9x9x9 cube. A cross
+-- section through the middle:
+--
+-- CCCC CCCC
+-- CBBB BBBC
+-- CBSS SSBC
+-- CBSWWWSBC
+-- CBSW#WSBC
+-- CBSW|WSBC
+-- CBSS|SSBC
+-- CBBB|BBBC
+-- CCCC|CCCC
+-- C = Concrete, B = Blast-resistant concrete, S = Stainless Steel,
+-- W = water node, # = reactor core, | = HV cable
+--
+-- The man-hole and the HV cable are only in the middle, and the man-hole
+-- is optional.
+--
+-- For the reactor to operate and not melt down, it insists on the inner
+-- 7x7x7 portion (from the core out to the blast-resistant concrete)
+-- being intact. Intactness only depends on the number of nodes of the
+-- right type in each layer. The water layer must have water in all but
+-- at most one node; the steel and blast-resistant concrete layers must
+-- have the right material in all but at most two nodes. The permitted
+-- gaps are meant for the cable and man-hole, but can actually be anywhere
+-- and contain anything. For the reactor to be useful, a cable must
+-- connect to the core, but it can go in any direction.
+--
+-- The outer concrete layer of the standard structure is not required
+-- for the reactor to operate. It is noted here because it used to
+-- be mandatory, and for historical reasons (that it predates the
+-- implementation of radiation) it needs to continue being adequate
+-- shielding of legacy reactors. If it ever ceases to be adequate
+-- shielding for new reactors, legacy ones should be grandfathered.
local reactor_structure_badness = function(pos)
- -- The reactor consists of a 9x9x9 cube structure
- -- A cross section through the middle:
- -- CCCC CCCC
- -- CBBB BBBC
- -- CBSS SSBC
- -- CBSWWWSBC
- -- CBSW#WSBC
- -- CBSW|WSBC
- -- CBSS|SSBC
- -- CBBB|BBBC
- -- CCCC|CCCC
- -- C = Concrete, B = Blast resistant concrete, S = Stainless Steel,
- -- W = water node, # = reactor core, | = HV cable
- -- The man-hole and the HV cable is only in the middle
- -- The man-hole is optional
-
local vm = VoxelManip()
- local pos1 = vector.subtract(pos, 4)
- local pos2 = vector.add(pos, 4)
+ local pos1 = vector.subtract(pos, 3)
+ local pos2 = vector.add(pos, 3)
local MinEdge, MaxEdge = vm:read_from_map(pos1, pos2)
local data = vm:get_data()
local area = VoxelArea:new({MinEdge=MinEdge, MaxEdge=MaxEdge})
- local c_concrete = minetest.get_content_id("technic:concrete")
local c_blast_concrete = minetest.get_content_id("technic:blast_resistant_concrete")
local c_stainless_steel = minetest.get_content_id("technic:stainless_steel_block")
local c_water_source = minetest.get_content_id("default:water_source")
local c_water_flowing = minetest.get_content_id("default:water_flowing")
- local concretelayer, blastlayer, steellayer, waterlayer = 0, 0, 0, 0
+ local blastlayer, steellayer, waterlayer = 0, 0, 0
for z = pos1.z, pos2.z do
for y = pos1.y, pos2.y do
for x = pos1.x, pos2.x do
- -- If the position is in the outer layer
+ local cid = data[area:index(x, y, z)]
if x == pos1.x or x == pos2.x or
y == pos1.y or y == pos2.y or
z == pos1.z or z == pos2.z then
- if data[area:index(x, y, z)] == c_concrete then
- concretelayer = concretelayer + 1
+ if cid == c_blast_concrete then
+ blastlayer = blastlayer + 1
end
elseif x == pos1.x+1 or x == pos2.x-1 or
y == pos1.y+1 or y == pos2.y-1 or
z == pos1.z+1 or z == pos2.z-1 then
- if data[area:index(x, y, z)] == c_blast_concrete then
- blastlayer = blastlayer + 1
+ if cid == c_stainless_steel then
+ steellayer = steellayer + 1
end
elseif x == pos1.x+2 or x == pos2.x-2 or
y == pos1.y+2 or y == pos2.y-2 or
z == pos1.z+2 or z == pos2.z-2 then
- if data[area:index(x, y, z)] == c_stainless_steel then
- steellayer = steellayer + 1
- end
- elseif x == pos1.x+3 or x == pos2.x-3 or
- y == pos1.y+3 or y == pos2.y-3 or
- z == pos1.z+3 or z == pos2.z-3 then
- local cid = data[area:index(x, y, z)]
if cid == c_water_source or cid == c_water_flowing then
waterlayer = waterlayer + 1
end
@@ -165,8 +175,7 @@
if waterlayer > 25 then waterlayer = 25 end
if steellayer > 96 then steellayer = 96 end
if blastlayer > 216 then blastlayer = 216 end
- if concretelayer > 384 then concretelayer = 384 end
- return (25 - waterlayer) + (96 - steellayer) + (216 - blastlayer) + (384 - concretelayer)
+ return (25 - waterlayer) + (96 - steellayer) + (216 - blastlayer)
end
local function meltdown_reactor(pos)
--
Gitblit v1.8.0